Brazil Products Archives - https://www.pharmalab.com/category/brazil-products/ Wed, 19 Aug 2026 05:47:40 +0000 en-US hourly 1 https://wordpress.org/?v=7.1 https://www.pharmalab.com/wp-content/uploads/2024/07/Pharmalab-logo-Fevicon-16x16-1.png Brazil Products Archives - https://www.pharmalab.com/category/brazil-products/ 32 32 Multi column distillation still https://www.pharmalab.com/multi-column-distillation-still/ Wed, 02 Nov 2022 05:38:48 +0000 https://arogyagyan.com/pharmalab/?page_id=5985 The post Multi column distillation still appeared first on .

]]> The post Multi column distillation still appeared first on .

]]> Pure Steam Generator https://www.pharmalab.com/pure-steam-generator/ Mon, 31 Oct 2022 07:04:27 +0000 https://arogyagyan.com/pharmalab/?page_id=5559   Our Brochures Download Enquire Now Send Now Pure Steam Generator As per cGMP requirements it is recommended to use Pure Steam in place of filtered plant steam. This steam […]

The post Pure Steam Generator appeared first on .

]]>
Water Systems

Enquire Now

[contact-form-7]

Pure Steam Generator

As per cGMP requirements it is recommended to use Pure Steam in place of filtered plant steam. This steam is used for all in-situ sterilization of vessels, Piping Distribution systems, autoclaves, and for humidification of sterile rooms. This will prevent contamination by particulate matter, organics and biological loads like Pyrogen, which is unavoidable in the case of plant (black) steam.
Pharmalab manufactures Pure Steam Generators to meet cGMP requirements. Condensate of this produced pure steam meets all pharmacopoeia requirements of WFI like USP, IP, BP and JP. The plant is manufactured as per FDA current Good Manufacturing Practices (cGMP) and ASME requirements.
Pure Steam generated from this equipment also surpasses steam quality tests like non-condensable gases, degree of super heat and saturation test as per requirement. Pharmalab has developed an improved version for removal of these gases before pure steam is produced.
The basic principle of operation is Distillation by Thin Film Evaporation. This consists of shell and tube heat exchangers where heat transfer is done by falling film evaporation which gives assurance of achieving high temperature for every drop of water, assures sterility aspect and ensures separation of pyrogenic load by centrifugal action generated during the upward movement of steam.
Care is taken while designing to avoid crevices that promote stagnation and stimulate bacterial growth. All contact parts where the Pure Steam is generated in this plant are electro polished. All pipe joints are orbitally welded. The column with which plant steam comes in contact has a double tube sheet construction to avoid the mixing of pure steam with plant steam in case there is a weld joint failure in the tube sheet. All gaskets are made from pure Teflon or Pharmaceutical grade Silicon.
The equipment is as per ASME design, and is CE approved for PED regulations as per European Union requirements.

OUTSTANDING FEATURES

  • The plant is constructed using SS 316 L (DIN 1.4435) with active surfaces being electro polished
  • Double tube sheet for heat exchanger and all pre-heaters
  • Glass wool insulated and covered using AISI 304 stainless steel sheet
  • All contact parts to WFI are electro polished with state-of-the-art technology
  • All pipes and tubes are ASME BPE stamped with less than 0.5 Ra (a to be subscript)
  • Frame is constructed using AISI 304 stainless steel.
  • Piping system is manufactured with electro polished pipes with orbital welding, sanitary fittings and pharma grade gaskets
  • Expansion joint design for tube-to-tube sheet joints
  • PLC based operation with all required inter locks and validated logic with skid mounted AISI 304 stainless steel control panel.
  • Complete documentation to serve international audit requirements.
  • Documentation compliant to international audit requirements

OPTIONAL FEATURES

  • Fully automatic plant with respect to boiler steam supply, cooling water flow rate and feed water flow rate
  • PLC system with SCADA duly validated as per 21 CFR part 1 1
  • CE and UL certification
  • Double tube sheet for all pre-heaters and both top coolers

The post Pure Steam Generator appeared first on .

]]> Autoclave (Steam Sterilizer) https://www.pharmalab.com/autoclave-steam-sterilizer/ Mon, 31 Oct 2022 07:03:36 +0000 https://arogyagyan.com/pharmalab/?page_id=5555 Our Brochures Download Enquire Now Send Now Δ Autoclave Sterilization (or sterilisation) in simple terms, refers to any process that effectively kills or eliminates transmissible agents (such as bacteria, viruses, […]

The post Autoclave (Steam Sterilizer) appeared first on .

]]>
Sterilizers

Enquire Now

[contact-form-7]

Autoclave

Sterilization (or sterilisation) in simple terms, refers to any process that effectively kills or eliminates transmissible agents (such as bacteria, viruses, spore forms etc.) from a surface, equipment or biological culture medium.
Sterilization can be achieved through application of heat, chemicals, irradiation, or filtration. Of these, heat (steam) sterilization is proven to be the most effective.
A minimum temperature-time relationship must be maintained throughout all portions of load to accomplish effective sterilization. Exposure time depends upon size and contents of load, and temperature within the sterilizer. At the end of the cycle, re-evaporation of water condensate must effectively dry contents of the load to maintain sterility.

PHARMALAB STERILIZER

Our sterilizer has been engineered to meet the stringent manufacturing standards, like cGMP, EN285 (European), MHRA (UK), FDA (US), being followed by the Pharmaceutical & Bio-tech industries, Pharmalab believes in “Total Quality” and “Total Customer Satisfaction”, hence manufacturing is in accordance with GAMP & ISO 9001 guidelines & our providing of documentation (Like DQ, OQ, IQ) enables customer to meet the above standards.

CERTIFICATION, GUIDELINE AND STANDARDS

  • PHARMALAB Quality system Approved by BVQI : ISO 9001 – 2008 Quality Management System.
  • ISO-13485:2003 Quality Systems for Medical Devices
  • The design and construction to comply with Good Manufacturing Practice (cGMP)
  • Design and Construction as per ASME code. Authorized to use “U” and “R” stamp
  • Approved & Certified design CE (PED -2014/68/EU)
  • Compliant to EN285

FEATURES

  • Control system as per 21CFR part 11.
  • Dimple jacket of SS 316L provided for enchanced / uniform and temperature distribution (within ±1oC during the sterilization phase).
  • Bioseal: A biological safety barrier separates the sterile and non-sterile zone.
  • Integration of sterile section with isolator.
  • Machine gasket groove for the door.
  • Air detection system for porus load.
  • Rack & Pinion arrangement for door movements.
  • Seal water recirculation arrangement.
  • Temperature control through PLC using floating sensor mechanism.
  • Electric Steam Generator (Optional).
  • Provided with Pure steam sampling arrangement with heat exchanger for easy draw of sample in aseptic and safe temperature condition(Optional).

The post Autoclave (Steam Sterilizer) appeared first on .

]]>