Bangladesh Products Archives - https://www.pharmalab.com/category/bangladesh-products/ Thu, 25 Jun 2026 07:32:12 +0000 en-US hourly 1 https://wordpress.org/?v=7.0.2 https://www.pharmalab.com/wp-content/uploads/2024/07/Pharmalab-logo-Fevicon-16x16-1.png Bangladesh Products Archives - https://www.pharmalab.com/category/bangladesh-products/ 32 32 Liquid Oral Plants https://www.pharmalab.com/liquid-oral-plants-3/ Mon, 14 Nov 2022 09:49:52 +0000 https://arogyagyan.com/pharmalab/?page_id=8076   Our Brochures Download Enquire Now Looking forWater SystemSterilizersBarrier IsolatorsProcess EquipmentsFiltration SystemsPackaging Send Now Liquid Oral Plants FEATURES Liquid Oral Processing Plant for Syrups & Suspensions, as per the customers’ […]

The post Liquid Oral Plants appeared first on .

]]>
Process Equipments

Enquire Now

[contact-form-7]

Liquid Oral Plants

LIQUID ORAL PLANTS

FEATURES

Liquid Oral Processing Plant for Syrups & Suspensions, as per the customers’ requirements to meet WHO, USFDA and MHRA norms. The equipments are manufactured as per cGMP guidelines and ASME standards.
Pharmalab is the leader in providing the latest technology in Liquid Processing Solutions in Semi-Auto or completely automated plant with SCADA SYSTEM.
  • We can offer you the complete plant comprising
  • Design and detailed Engineering
  • Equipments & Piping Layouting
  • Sugar and Glucose Transfer System
  • Sugar Syrup Preparation with efficient bottom entry agitation
  • Clear and Suspended Liquid Manufacturing System with On-line or Built-in Homogenizer
  • Efficient Filtration System for the clear/suspension syrups
  • Agitated or Non-Agitated Storage Vessels for the Filling line with change over panels
  • CIP & SIP System for cleaning & sanitization of the system
  • SS Operational platform with Stair & Railing
  • Sterile Piping System with Sterile Control Valves and most suitable instrumentation
  • PLC based Automation System as per 21 CFR Part 11 (Optional)
  • System Qualification Documents like DQ, FAT, IQ & OQ Protocols
  • State-of-the-Art manufacturing under highly qualified workshop by skilled labour
  • Efficient site teams for the erection and assistance in the validation of the process cycle.
  • “CE” marked Equipments are offered with Third Party Inspection & All Electrical Control with ERTL Approval & Test
  • Prompt After Sales Services

SPECIFICATIONS

  • Crevice & Dead leg free design, Contact surfaces to less than 0.5 m RA finish from inside
  • Complete drainability
  • Contact Parts: MOC SS 316L
  • Non-Contact MOC SS 304 finished to 0.8 m RA Matt
  • Completely suitable for in-line CIP & Sanitization
  • Product Sampling devices
  • Food Grade Gaskets in compliance with FDA 21 CFR Part 177-2600
  • Zero Dead-Leg Flush Bottom Diaphragm Valves

APPLICATIONS

  • Cough Syrups
  • Oral Drops
  • Expectorants
  • Antacid Suspensions

The post Liquid Oral Plants appeared first on .

]]> Water For Injection Generation Plant https://www.pharmalab.com/water-for-injection-generation-plant/ Mon, 31 Oct 2022 07:04:47 +0000 https://arogyagyan.com/pharmalab/?page_id=5561 Our Brochures Download Enquire Now Send Now Δ Water For Injection Generation Plant Over the last 30 years, Pharmalab has been the leading supplier of plants producing water for injection, […]

The post Water For Injection Generation Plant appeared first on .

]]>
Water Systems

Enquire Now

[contact-form-7]

Water For Injection Generation Plant

Over the last 30 years, Pharmalab has been the leading supplier of plants producing water for injection, which meets international standards, including USP, IP, BP and JP. The plants are manufactured as per FDA’s current Good Manufacturing Practices (cGMP) and ASME requirements and follows the basic principle of Distillation by Thin Film Evaporation.
This process involves a shell and tube heat exchangers (columns) where heat transfer is done by falling film evaporation. Very high temperatures are reached for every drop of water produced, thus ensuring sterility levels demanded for WFI. Separation of the Pyrogenic load is achieved through centrifugal forces generated during the upward movement of the steam.
During the process, the feed and distilled water within the plant is in constant motion and hence there is no stagnancy. Impurities, along with the Pyrogenic load, are continuously purged from the last column. At start-up during pre-heating and self-sanitizing the residual accumulated water will also drain off before WFI is produced.
Our plant is designed to be crevice-free as crevices promote stagnation and stimulate bacterial growth. All columns are designed to ASME specifications and are approved by CE for PED regulations as per European Union requirements. All parts in the plant coming into contact with WFI and Pure Steam are electro polished, pipe joints are orbitally welded, gaskets are made from pure Teflon or pharmaceutical-grade silicon and the first column is a double tube sheet designed to prevent pure steam mixing with plant steam, should there be a weld joint failure in the tube sheet.
This state-of-the-art system delivers WFI of a quality standard for storage and distribution that is, much higher than what is desired by pharmacopoeias throughout the world.

OUTSTANDING FEATURES

  • The plant is completely made with SS 316L (DIN 1.4435) stainless steel with active surfaces being electro polished.
  • Double tube sheet for first heat exchanger where boiler steam is used.
  • The insulation is made of glass wool covered by AISI 304 stainless steel sheet.
  • All contact parts to WFI are electro polished with state-of-the- art technology.
  • All pipes and tubes as per ASME BPE stamping with less than 0.5 Ra.
  • The frame is made of AISI 304 stainless steel.
  • The piping system is manufactured with electro polished pipes being orbital welded with sanitary fittings and pharmaceutical-grade gaskets.
  • Expansion joint design for tube-to-tube sheet joints.
  • PLC based operation with all required inter locks and validated logic with skid mounted AISI 304 stainless steel control panel.
  • Complete documentation to serve international audit requirements.

OPTIONAL FEATURES

  • Fully automatic plant with respect to boiler steam supply, cooling water flow rate and feed water flow rate.
  • All pipes and tubes as per ASME BPE stamping with less than 0.5 Ra.
  • PLC system with SCADA duly validated as per 21 CFR part 1 1.
  • CE and UL certification is provided on request.
  • Double tube sheet for all pre-heaters and both top coolers.

The post Water For Injection Generation Plant appeared first on .

]]> Autoclave (Steam Sterilizer) https://www.pharmalab.com/autoclave-steam-sterilizer/ Mon, 31 Oct 2022 07:03:36 +0000 https://arogyagyan.com/pharmalab/?page_id=5555   Our Brochures Download Enquire Now Send Now Autoclave Sterilization (or sterilisation) in simple terms, refers to any process that effectively kills or eliminates transmissible agents (such as bacteria, viruses, […]

The post Autoclave (Steam Sterilizer) appeared first on .

]]>
Sterilizers

Enquire Now

[contact-form-7]

Autoclave

Sterilization (or sterilisation) in simple terms, refers to any process that effectively kills or eliminates transmissible agents (such as bacteria, viruses, spore forms etc.) from a surface, equipment or biological culture medium.
Sterilization can be achieved through application of heat, chemicals, irradiation, or filtration. Of these, heat (steam) sterilization is proven to be the most effective.
A minimum temperature-time relationship must be maintained throughout all portions of load to accomplish effective sterilization. Exposure time depends upon size and contents of load, and temperature within the sterilizer. At the end of the cycle, re-evaporation of water condensate must effectively dry contents of the load to maintain sterility.

PHARMALAB STERILIZER

Our sterilizer has been engineered to meet the stringent manufacturing standards, like cGMP, EN285 (European), MHRA (UK), FDA (US), being followed by the Pharmaceutical & Bio-tech industries, Pharmalab believes in “Total Quality” and “Total Customer Satisfaction”, hence manufacturing is in accordance with GAMP & ISO 9001 guidelines & our providing of documentation (Like DQ, OQ, IQ) enables customer to meet the above standards.

CERTIFICATION, GUIDELINE AND STANDARDS

  • PHARMALAB Quality system Approved by BVQI : ISO 9001 – 2008 Quality Management System.
  • ISO-13485:2003 Quality Systems for Medical Devices
  • The design and construction to comply with Good Manufacturing Practice (cGMP)
  • Design and Construction as per ASME code. Authorized to use “U” and “R” stamp
  • Approved & Certified design CE (PED -2014/68/EU)
  • Compliant to EN285

FEATURES

  • Control system as per 21CFR part 11.
  • Dimple jacket of SS 316L provided for enchanced / uniform and temperature distribution (within ±1oC during the sterilization phase).
  • Bioseal: A biological safety barrier separates the sterile and non-sterile zone.
  • Integration of sterile section with isolator.
  • Machine gasket groove for the door.
  • Air detection system for porus load.
  • Rack & Pinion arrangement for door movements.
  • Seal water recirculation arrangement.
  • Temperature control through PLC using floating sensor mechanism.
  • Electric Steam Generator (Optional).
  • Provided with Pure steam sampling arrangement with heat exchanger for easy draw of sample in aseptic and safe temperature condition(Optional).

The post Autoclave (Steam Sterilizer) appeared first on .

]]>